Schneider Electric ATV310H075N4E Altivar Variable Speed Drive


₹ 12,882.87

Indian Pricelist
Mechtrace by CS Bakery Solutions
IVY-75X383'' Nylon Wheel With Brake (ACFM / TCON / TS500 / T-CON)
IVY-75X383'' Nylon Wheel With Brake (ACFM / TCON / TS500 / T-CON)
₹ 1,125.00
₹ 1,250.00 (10% OFF)
Schneider Electric Altivar ATV310HU15N4E Variable Speed Drive
Schneider Electric Altivar ATV310HU15N4E Variable Speed Drive
₹ 15,790.79
₹ 17,545.32 (10% OFF)

Schneider Electric ATV310H075N4E Altivar Variable Speed Drive
(0 review)

Schneider electric ATV310, 0.75 kW/1 hp Heavy Duty, 380...460 V, 3 phases, without EMC filter Variable Speed Drive.

₹ 12,882.87 12882.87 INR ₹ 14,314.30

₹ 14,314.30

    This Easy Altivar 310 drive is a frequency inverter for three-phase asynchronous motors. Its protection index is IP20. It works at a rated power up to 0.75kW/1HP, and a rated voltage from 380V to 460V AC. Its compact size, robust design and ease of installation, based on the principle of plug and play and its integrated functions make it particularly suitable for applications involving industrial machines and certain consumer machines. It offers high readability of key parameters thanks to a bright LED 4-digit display. Underload and overload detection help to protect your installation. It weighs 0.8kg and its dimensions are, 72mm wide, 143mm high, 140mm deep. This drive incorporates functions that are suitable for the most common applications, including textile machine, machine tools, wood making machine, material handling, packaging and printing machines, ceramic machine.


    Range of productEasy Altivar 310
    Product or component typeVariable speed drive
    Product specific applicationSimple machine
    Assembly styleWith heat sink
    Device short nameATV310
    Network number of phasesThree phase
    [Us] rated supply voltage380...460 V - 15...10 %
    Motor power kW0.75 kW for heavy duty
    Motor power hp1 hp for heavy duty
    Product destinationAsynchronous motors
    Quantity per setSet of 1
    EMC filterWithout EMC filter
    Supply frequency50/60 Hz +/- 5 %
    communication port protocolModbus
    Connector typeRJ45 (on front face) for Modbus
    Physical interface2-wire RS 485 for Modbus
    Transmission frameRTU for Modbus
    Transmission rate4800 bit/s
    9600 bit/s
    19200 bit/s
    38400 bit/s
    Number of addresses1…247 for Modbus
    Communication serviceRead holding registers (03) 29 words
    Write single register (06) 29 words
    Write multiple registers (16) 27 words
    Read/write multiple registers (23) 4/4 words
    Read device identification (43)
    Line current3.5 A at 380 V (heavy duty)
    3.1 A at 460 V (heavy duty)
    Apparent power2.5 kVA at 460 V (heavy duty)
    Prospective line Isc5 kA
    Continuous output current2.3 A heavy duty
    Maximum transient current3.5 A during 60 s (heavy duty)
    Power dissipation in W28.8 W, at In (heavy duty)
    Speed drive output frequency0.5…400 Hz
    Nominal switching frequency4 kHz
    Switching frequency2...12 kHz adjustable
    Speed range1…20
    Transient overtorque170…200 % of nominal motor torque depending on drive rating and type of motor
    Braking torqueUp to 150 % of nominal motor torque with braking resistor at high inertia
    Up to 70 % of nominal motor torque without braking resistor
    Asynchronous motor control profileSensorless flux vector control
    Energy saving ratio
    Quadratic voltage/frequency ratio
    Motor slip compensationPreset in factory
    Output voltage380...460 V three phase
    Electrical connectionTerminal, clamping capacity: 1.5...2.5 mm² (L1, L2, L3, PA/+, PB, U, V, W)
    Tightening torque0.8…1 N.m
    InsulationElectrical between power and control
    SupplyInternal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection
    Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection
    Analogue input number1
    Analogue input typeConfigurable current AI1 0...20 mA 250 Ohm
    Configurable voltage AI1 0...10 V 30 kOhm
    Configurable voltage AI1 0...5 V 30 kOhm
    Discrete input number4
    Discrete input typeProgrammable LI1...LI4 24 V 18...30 V
    Discrete input logicNegative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm
    Positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
    Sampling duration10 ms for analogue input
    20 ms, tolerance +/- 1 ms for logic input
    Linearity error+/- 0.3 % of maximum value for analogue input
    Analogue output number1
    Analogue output typeAO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits
    AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits
    Discrete output number2
    Discrete output typeLogic output LO+, LO-
    Protected relay output R1A, R1B, R1C 1 C/O
    Minimum switching current5 mA at 24 V DC for logic relay
    Maximum switching current2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
    2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
    3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay
    4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay
    Acceleration and deceleration rampsU
    Linear from 0...999.9 s
    Braking to standstillBy DC injection, <30 s
    Protection typeLine supply overvoltage
    Line supply undervoltage
    Overcurrent between output phases and earth
    Overheating protection
    Short-circuit between motor phases
    Against input phase loss in three-phase
    Thermal motor protection via the drive by continuous calculation of I²t
    Frequency resolutionAnalog input: converter A/D, 10 bits
    Display unit: 0.1 Hz
    Time constant20 ms +/- 1 ms for reference change
    operating positionVertical +/- 10 degree
    Height143 mm
    Width72 mm
    Depth140 mm
    Net weight0.8 kg

    Easy Altivar 310_ATV310H075N4.pdf
    Related Products